Rock Hounds Who Sniff Out Gas
By Jill Farinelli

The pilot light on your stove goes out and your kitchen begins to smell like rotten eggs. Gas leak, you think to yourself. But that’s not gas you smell. It’s a chemical called mercaptan, which the gas company has added to make it easy for you to detect a leak. Natural gas, itself, is colorless and odorless. You may wonder, then, how do gas companies find it underground?

“There are a lot of ways to look for oil and natural gas,” says James A. Gibbs, a consulting petroleum geologist and independent oil and gas producer in Dallas, Texas. (A geologist studies the physical nature and history of the earth.) An oil seep on the surface of the ground is a telltale sign of gas below, since oil and gas are usually found together. Companies also conduct soil and airborne gas surveys (called “gas sniffers”), which detect the presence of gas molecules in surface soil and air. But these methods are just the first step, says Gibbs. What you really need to do is find the underground trap.

A petroleum geologist knows that in order for gas to be present underground, there must be a source rock that produced the gas, a porous reservoir rock (usually sandstone or limestone) that holds the gas, and an overlying bed of impervious rock, called a seal, above the reservoir rock to keep the gas from escaping. This configuration of rocks that allows the gas to be contained is called a trap.

The source rock is the place where, millions of years ago, tiny sea plants and animals—called phytoplankton and zooplankton—lived, died, and were preserved. Source rock contains the source of the hydrocarbon. Shale is a common source rock. The reservoir rock is a layer of permeable sedimentary rock, usually sandstone or limestone. The gas migrates into the pores of the reservoir rock. The seal is a dome-shaped layer of impermeable rock, often made of granite, above the reservoir rock that traps the gas and keeps it from moving upward. The seal is also called a cap rock.

How does a petroleum geologist find a trap? He or she might begin by examining aerial and satellite photographs of the site and mapping the surface. “From these surface maps,” explains Gibbs, “the geologist can project the geometry of the surface into the subsurface to see what rocks may be at depth.” The geologist might also make subsurface maps from data obtained by existing wells nearby.

The geologist will also conduct a number of tests—including gravity, magnetic, and seismic surveys—that supply data about the properties of the rocks below and thereby help the scientist to determine where these gas traps are located. “So you’re not really looking directly for the hydrocarbon, you’re looking for where the hydrocarbon might be,” says Gibbs.

But even then, says Gibbs, “the only definitive test that you have for hydrocarbons is, unfortunately, a bore hole—a well. Because even though you’ve done everything you possibly can to determine the presence of a trap, you may get down there and find that the reservoir rock that you expected to see [is] plugged up.”

Gibbs adds, “It’s like a puzzle or an investigation, in which you take all these geological clues and you match your wits against the rocks and try to imagine where oil and gas could occur.”

Career Advice from a Petroleum Geologist

Use these links to visit another section of the site.

The Body Electric		The World of Wires		Dangerous Waters		It's a Gas		You've Got the Power		Fire in the Sky